Ultralight tent for 2 people - Sawaj Camel 2 – green | HUSKY OUTDOOR
(5)

Ultralight tent for 2 people Sawaj Camel 2

An ultralight and stable 2-person tent suitable for bicycle touring, motorcycle touring, trekking, or backpacking.

279,61 € -0% 279,61 €
COLOUR: GREEN

Description

The Sawaj Camel from the Ultralight range is our lightest tent with a frame. If you need to save every gram on your trips, this model is the right choice for you. The frame of this double-skin freestanding tent consists of a single pole that on each end divides into two branches – guaranteeing wind resistance and stability. Sawaj Camel provides enough room to comfortably fit two people.

Characteristics of the Sawaj Camel 2 tent:

  • A lightweight and strong dural structure with lightweight pegs to stake the tent out for stability even in adverse weather.
  • The extraordinarily low weight of 1.6 kg for high comfort when you’re on the move.
  • The silicon coating of the materials of the outer tent and ground sheet prevents water penetration and provides thermal insulation even at low temperatures.
  • The outer tent, inner tent, and groundsheet are made from high-quality materials, thereby ensuring great durability, breathability and comfort.
  • Comfortable internal space for two people and their baggage.

  • Ultralight tent Ultralight tent
  • 2 people 2 people
  • UV protection UV protection
  • Duralumin poles Duralumin poles
  • Ripstop material Ripstop material
  • ISO 811 2018 certification ISO 811 2018 certification
  • Two-sided silicone coating Two-sided silicone coating
  • Waterproof bag Waterproof bag

Ultralight Tent | Sawaj Camel 2
Dimensions (W × L × H) 140 x 285 x 110 cm
Dimensions (packed tent) 40 x 12 cm
Weight min./total 1.3/1.6 kg
Design Double-skin freestanding tent with poles on the inside
Outer tent water column 3,000 mm H2O
Groundsheet water column 10,000 mm H2O
Poles ø 8.5 mm duralumin Y poles
Accessories lightweight dural pegs, repair kit, mesh pocket for storing small items, compression sack

INNER TENT: 20D ripstop nylon

20D ripstop nylon

Very light and breathable synthetic fibres that are also sufficiently strong and elastic. That’s why they are very resistant to tearing. This material is also suitable for freezing cold conditions because of its good thermal insulation properties. In addition, the fabric is reinforced with a ripstop finish. Fabrics woven using this technology prevent mechanical damage, and if any such damage occurs, they stop it spreading further.

OUTER TENT: 20D 360T ripstop nylon

ripstop nylon

Very light and breathable synthetic fibres that are also sufficiently strong and elastic. That’s why they are very resistant to tearing. This material is also suitable for freezing cold conditions because it has good thermal insulation properties. In addition, the fabric is reinforced with a ripstop finish. Fabrics woven using this technology prevent mechanical damage, and if any such damage occurs, they stop it spreading further.

Siliconizing (double-side coating 3,000 mm/cm²)

A silicon coating is a reliable way of protecting the material against dampness as efficiently as possible, and it does so permanently. The impregnation is second to none, it’s light and extra-strong, and applied on the outer layer of the tent. Moreover, a material with this coating has a considerably higher resistance to UV radiation, as well as good thermal insulation properties. So it can be used even at very low temperatures.

The double-side silicon coating, in combination with the nylon and ripstop finish of the material constitutes currently the most advanced and lightest combination of technologies. Due to siliconizing, nylon is protected from UV radiation and is absolutely waterproof. Furthermore, this version makes it possible to use the lowest possible material weight.

POLES: Dural

Dural

Thanks to its advantageous properties, this material is widely used for outer tent structures, especially for expedition tents where every gram counts. Dural is an alloy combining aluminum with other elements to give it a low weight and the ability to withstand a large loads.

GROUNDSHEET: 70D 210T nylon, polyurethane (coating 10,000 mm H2O)

70D 210T nylon

A very light and breathable material that’s also sufficiently firm and elastic. This is what makes it so resistant to tearing and other mechanical damage. It’s also suitable for freezing conditions because it has good thermal insulation properties.

Polyurethane (coating 10,000 mm H2O)

The polyurethane coating provides permanent impregnation and is applied directly onto the material in various layers. This special treatment of the material prevents water penetration. The coating parameter is given by the height of the water column (stated in mm H2O), in other words the ability of the material to withstand water pressure.

SIMILAR PRODUCTS

We care about your privacy

HUSKY CZ, s.r.o. they need your consent to the use of cookies so that they can better customize the website for you and make it easier to use. By clicking the "I agree" button, you agree to save cookies in your browser, thanks to which you can use the website's potential to the fullest. Details can be found on the page "Information about cookies".

Login
to the HUSKY club